You just learned about vaping weed and are excited to try it out…
You found the most sophisticated vaporizer with an abundance of buttons, functionalities and inhalation methods…
As you start your new vaping journey, you realize the performance of your newly bought vaping companion leaves much to be desired…
You can’t help but wonder:
Is it me or does this ‘thing’ not live up to its hype?
Maybe you got your vaporizer before finding this website and it’s not living up to its hype…
Or it could be you…
…and you not understanding how to properly use a vaporizer.
So how exactly do you use a vaporizer?
Every vaporizer has somewhat of a learning curve to really optimize its performance…
But there are 5 essential tricks that are applicable to ANY vaporizer.
And in today’s post you will exactly learn what those 5 tricks are.
With these 5 essential tricks you’ll have a solid foundation on using any vaporizer properly.
Grind Your Weed According to Your Vaporizer-Type
Using the grind that’s appropriate to your particular heating system is very important if you want proper vapor production.
There are 3 types of heating systems:
- Hybrid (combination of conduction and convection)
With a pure conduction vaporizer, you want to grind your herb as fine as possible.
In conduction-style heating your herb gets heated by directly being exposed to a heated surface. The finer your herb is ground, the more particles will get exposed to this heated surface.
With a pure convection vaporizer, use a medium grind.
In convection-style heating your herb gets heated by hot air. So you want to maximize airflow in your bowl. If you use a fine grind, airflow will be severely restricted by the compactness of your weed.
With a conduction-convection hybrid vaporizer, it all depends on the ratio of conduction / convection.
The more conduction there is, the finer your grind has to be.
Generally speaking, it works best to go somewhere in between medium and fine.
Pack Your Bowl According to Your Vaporizer-Type
Filling your bowl up appropriately is one of the most important parts in using a vaporizer properly.
If it’s not filled appropriately, your herb won’t get heated properly…
And your vapor production and vapor quality will SUCK.
Filling your bowl appropriately is a 4-step process:
1. The minimum amount of herb that’s needed: cover the bottom surface area of your bowl
With any vaporizer I’ve ever tried, the minimum amount of herb that was needed in the bowl to produce satisfying hits, was so much that the bottom surface area / bottom screen of the bowl was covered with weed.
2. Don’t overpack your bowl with convection-style vapes
It’s never a good idea to FULLY pack your bowl. Always pack your bowl 80-90%, never more. This is especially important with convection-style vaporizers.
3. If you pack your bowl less than 50%, use a screen / liquid pad to compress your herb
This just really helps with the performance of any vaporizer I’ve noticed, convection or conduction.
4. Loose vs tight pack: convection vs. conduction
With a convection vaporizer it’s important to pack your bowl loosely so the air can pass through every part of your herb. Note: this doesn’t necessarily hold true if you fill your bowl less than 50%.
With a conduction vaporizer you want to pack your bowl as tightly as possible. Compress your herb the best you can.
Tip: if efficiency is important to you (if you want to save money), a small bowl forces you to be efficient. In our advanced guide on how to find the most efficient vaporizer, you can read why and get exclusive tips on how to be really efficient with your vaporizer.
Use the Right Draw-Technique
Using the right draw-technique is very dependent on your specific vaporizer.
Here are some general tips though that work with 80% of the vaporizers:
- Draw for at least 5-10 seconds;
- Draw slowly and controlled with most vaporizers;
- Realize that vapor doesn’t feel like smoke, its WAY more subtle.
For specific draw-techniques per vaporizer check out our vaporizer reviews.
Use the Right Temperature
Different vaporizers have different temperature control systems.
But all of them fall in one of these 3 categories:
- A precise temperature control system (temp controllable in 1 to 5 degree increments);
- An interval-based temperature control system (temp controllable in 10+ degree intervals);
- A fixed temperature control system (1 temperature).
With any of these temperature control systems, the MINIMUM your vaporizer needs to reach in the bowl, for you to feel ANYTHING at all is:
- 315°F / 157°C (the boiling point of THC)
But keep in mind this is the temperature your vaporizer needs to reach in the herb chamber. Most vaporizers show the temperature of your heating element. The temperature in your herb chamber will naturally be a little bit lower than the temperature setting of your heating element.
So add a couple of degrees to the minimum setting. I would say the following temperature is a good benchmark for the minimum your vaporizer temp setting has to reach:
- 338°F / 170°C
If you’re an ex-smoker:
This temperature will probably be too low. The vapor will be very subtle at this minimum temperature…and you might be wondering if you’re inhaling anything at all. So if you’re an ex-smoker crank up that temperature dial to at least:
- 374°F / 190°C
Also I might be stating the obvious here…but give your vaporizer enough time to fully heat-up. This is all dependent on your specific vaporizer and ranges from 10 seconds to 15 minutes.
If you really want to dive deep in vaping temperatures, check out our advanced guide on how to choose the best temperature to vape weed.
Keep Your Vaporizer Fresh and Clean
Whatever vaporizer you have…
It’s important to keep it in its best condition.
But every vaporizer has 3 crucial parts which need to be clean at all times.
Keep your vapor path clear of any resin
Resin is the build-up of oily residue that weed leaves behind when it gets heated. The airflow will be severely restricted if you let resin build up in your vapor path…and the performance of your vaporizer will take a hit.
Keep your bowl clean
With convection-style vaporizers this is important because your airflow will be restricted if old chunks of weed are in your bowl. You might even be tasting already vaped bud (AVB)…and trust me this won’t be tasting well.
With conduction-style vaporizers old chunks of weed in your bowl will form a layer of protection around your fresh herb. And that’s exactly what we don’t want since our herb needs to get exposed to the heated surface fully.
Keep your screens clean / replace them
The screen(s) in your vaporizer serve an important function:
They prevent weed particles passing through your vapor path and ending up in your…mouth. Having weed particles in your mouth every time you take a draw makes for a…rather unpleasant vaping experience.
In the process of stopping these particles at the gates, your screens will get dirty and get clogged. A clogged screen will stop your vapor at the gates as well. And since this vapor is exactly what we want to inhale when we’re vaping (who would’ve thought that)…it’s important to have a an un-clogged screen.
Usually your screen(s) can be found close to your bowl. Either above it or at the bottom.
While most people blame their vaporizer for its bad performance…
YOU on the other hand learned that these people probably just have no idea on how to use a vaporizer properly.
With the 5 tricks you’ve learned in this post you have a solid foundation on using any vaporizer properly.
Of course for every vaporizer there are vaporizer-specific tricks to really optimize its performance…and those can be found on the vaporizer review pages.
The next time someone blames his vaporizer or vaping in general to suck donkey balls, tell that person to get him/herself a solid foundation on how to use a vaporizer properly with this post.
Check out our vaporizer reviews if you’re looking for a new vaporizer or just interested in seeing the latest vaporizers.
If you enjoyed this post and want more, become a fan on Facebook and click share to spread this timeless and unbounded vaporizer knowledge ;-).